Stepper Motorized MiNi SY-04 Syringe Pumps

$450.00

Specification

SY-04-5ML
SY-04-10ML
SY-04-20ML
SY-04-5ML-C
SY-04-10ML-C
SY-04-20ML-C

Stepper Motorized Syringe Pump

Volume 5ml, 10ml, 20ml
Fluid Path PTFE, Borasilicate Glass
Lead screw 1mm
Communication RS232, RS485, CAN
Accuracy +/-1%
Repeatability 0.3%-0.7%
Liquid pressure 0-1.2Mpa
Control PLC, Communication RS232/RS485/CAN, Driver
stepper motorized syringe pump

Technical parameter
Model No. MiNi SY-04
Accuracy ≤1% @100% stroke
Repeat accuracy 3‰-7‰
Pressure 0-1.0Mpa (air) 0-1.2Mpa (water)
Service life 3 million times no leakage (media: water)
Detection photosensor check original piston position for accurate location
Rated stroke (control steps)
5ml 30mm (12000 steps)
10ml 24.08mm (9632 steps)
20ml 24.88mm (9952 steps)
Linear speed 0.017mm/s-5mm/s
Time range (rated stroke) 6s-1765s, 4.8s-1416s, 5s-1464s
Accuracy resolution 0.0025mm/0.4154μL, 0.0025mm/1.0381μL, 0.0025mm/2.0096μL
Linear Actuator Korea KSS Ball Screw (pitch 1mm)
Max piston drive ≥100N
Sub piston drive ≥45N
Cylinder ID 5ml 14.55mm, 10ml 23mm, 20ml 32mm
Fluid path Borosilicate cylinder, PTFE piston
Max pressure Positive air pressure 0-1.0Mpa / Negative air pressure 0-0.05Mpa
Connector 1/4-28UNF Female
Communication RS232/RS485/CAN
Baud rate 9600dps, 19200dps, 38400dps, 57600dps, 115200dps
Device add. & Parameter setting Serial Port
Dimension (L*W*H) 42*42*210mm
Power supply DC24V/1.5A
Working temperature 5-55℃
Working humidity <80%
Net weight 0.72Kg

Stepper Motor Orange n Blue, Red n Yellow two phase bipolar
Stepper Motorized
Stepper Motor Controller

You may also like...