12 or 24v power supply for 3D Printers

$8.00

Specification

S-120-12V 120W
S-240-12V 240W
S-350-12V 350W
S-120-24V 120W
S-240-24V 240W
S-350-24V 350W

12V or 24VDC Switching Power Supply

At most 3 ways output power supply, please don't overload while using. To drive a stepper as example, To keep safe, power supply rated output current is better 1.5 times more than the stepper motor n driver's rated current in total its powered.
S-350-12 12VDC Power Supply:
In AC power supply, there are two symbols L and N. N is Neutral while L is Live Line. N is Neutral: it means this wire is connected to ground and so it always 0V compared to ground.L is Live Line which carries the AC 110-220 volts relative to the ground, it's also called the hot line.
Output Voltage:12V
Output Type Single Channel
Input Voltage:110V/230VAC(selected by switch)
Output amps 29A
DC Output Power:350W
Weight:1.2kgs
Dimension:215*115*50mm

S-350-24 24VDC Power Supply:
Output Voltage:24V
Output Type Single Channel
Input Voltage:110V/230VAC(selected by switch)
Output amps 14.6A
DC Output Power:350W
Weight:1.2kgs
Dimension:215*115*50mm
350W or 360W switching power supply
switching power supply 360w
Power supply which is widely used to light led strip or to power stepper driver and stepper motors.

3D Printer Power Supply

Are you trying to find a powerful power supply for your 3D Printers? 120W power supply can Not meet yours needs, 12V and 24V 360W, 480W and 600W are available for applications.
You need a power supply Not only for XYZ stepper motors but also stepstruder geared stepper motor, hotend and a high power consumption silicone rubber heater pad, led strip to decorate, etc.

You may also like...